Powder Coated Steel Lintel

In order to cater the variegated demands of our precious clients, we are offering an excellent quality range of 100mm Powder Coated GI Lintel.

Advantages Of Using “NE Lintels”:

• NE Lintels are available in standard sizes and customized sizes as required.
• The major advantage that lintels over the prestressed concrete is the strength to weight ratio. Lintels promise better load bearing capacity.
• Easy to use. As such does not need involvement of skilled mason.
• Huge amount of construction time and labour is saved compared to conventional RCC lintel construction practices.
• Since because it is just about placing the readymade lintel atop the window or door and continue with further brickwork, the construction job is completed in a quick time and labour cost is also saved.
• Highly Durable and aesthetically beautiful.
• Resistant to any climatic extremities.

Installation Procedure

• NE Lintels must have a minimum end bearing of 150mm on each side of the opening, bedded on mortar. (150mm bearing for openings below 1.8 mtr and 200mm for openings above 1.8 mtr).
• The lintel should be in level along its length and across its width. Masonry built must be laid on a mortar bed and all perpendicular joints to be filled with mortar.
• Temporary propping beneath a steel lintel is practised to facilitate speed of construction. Care should be taken to avoid shock loading on lintels when doing masonry work above it.
• The bracket can be used for bearing of lintel when the wall is not present for bearing purpose. Mark the hole location first then make a drill using 5mm drill bit and then fix bracket by plumbing nails with flat washers.

Steps:

• Lintels shall be simply supported at each solid base using a minimum end bearing of 150-200mm as prescribed for suitable length.
• Check lintels should not be cut to length or used if damaged.
• Lintels must always be used within their weight capacity (see lintels loading table) or other size suggested by us as site situation.
• Mortor should be applied before placing lintel on wall.
• Keep lintel in level along its length and across its width.
• Apply mortor inside lintel before starting masonry work.
• Use props for support at center of the lintel for span above 1 mtr to avoid deflection.
• Do not remove the props until the masonry work touches the slab bottom or rigid surface above the lintel and masonry should be totally dry.
• Plastering can be done after masonry work done. No need to use any mesh for bonding. Perforation helps for strong bonding between lintel and mortor.
• If wall is not present for bearing at another end of the lintel then use bracket of the same lintel width for bearing.
• Mark the hole location first then make a drill using 5mm drill bit. Then fix bracket by using plumbing nails or screws (for screws use pvc plugs) also use flat washers for nail.

Benefits:

• Robust & Rust Proof Design
• Extremely Time Saving
• Cost Saving upto 50%
• Mason can Install it while Masonry work
• Maximum Perforations for strong plaster bonding
• High Strenght to weight ratio
• No curing required
• Easy To Handle due to Light weight

We are among the reputed organizations, deeply engaged in offering an optimum quality range of 150mm Perforated Mild Steel Lintel. 

Advantages Of Using “NE Lintels”:

• NE Lintels are available in standard sizes and customized sizes as required.
• The major advantage that lintels over the prestressed concrete is the strength to weight ratio. Lintels promise better load bearing capacity.
• Easy to use. As such does not need involvement of skilled mason.
• Huge amount of construction time and labour is saved compared to conventional RCC lintel construction practices.
• Since because it is just about placing the readymade lintel atop the window or door and continue with further brickwork, the construction job is completed in a quick time and labour cost is also saved.
• Highly Durable and aesthetically beautiful.
• Resistant to any climatic extremities.

Installation Procedure

• NE Lintels must have a minimum end bearing of 150mm on each side of the opening, bedded on mortar. (150mm bearing for openings below 1.8 mtr and 200mm for openings above 1.8 mtr).
• The lintel should be in level along its length and across its width. Masonry built must be laid on a mortar bed and all perpendicular joints to be filled with mortar.
• Temporary propping beneath a steel lintel is practised to facilitate speed of construction. Care should be taken to avoid shock loading on lintels when doing masonry work above it.
• The bracket can be used for bearing of lintel when the wall is not present for bearing purpose. Mark the hole location first then make a drill using 5mm drill bit and then fix bracket by plumbing nails with flat washers.

Steps:

• Lintels shall be simply supported at each solid base using a minimum end bearing of 150-200mm as prescribed for suitable length.
• Check lintels should not be cut to length or used if damaged.
• Lintels must always be used within their weight capacity (see lintels loading table) or other size suggested by us as site situation.
• Mortor should be applied before placing lintel on wall.
• Keep lintel in level along its length and across its width.
• Apply mortor inside lintel before starting masonry work.
• Use props for support at center of the lintel for span above 1 mtr to avoid deflection.
• Do not remove the props until the masonry work touches the slab bottom or rigid surface above the lintel and masonry should be totally dry.
• Plastering can be done after masonry work done. No need to use any mesh for bonding. Perforation helps for strong bonding between lintel and mortor.
• If wall is not present for bearing at another end of the lintel then use bracket of the same lintel width for bearing.
• Mark the hole location first then make a drill using 5mm drill bit. Then fix bracket by using plumbing nails or screws (for screws use pvc plugs) also use flat washers for nail.

Benefits:

• Robust & Rust Proof Design
• Extremely Time Saving
• Cost Saving upto 50%
• Mason can Install it while Masonry work
• Maximum Perforations for strong plaster bonding
• High Strenght to weight ratio
• No curing required
• Easy To Handle due to Light weight

GI Steel Lintel is new innovative product by "NEsteel Lintels"  which saves your construction time and cost.

• It's easy to install and suitable with all type of bricks & blocks.
• Our Lintel is 100% rust proof and we provide warranty for GI coating.
• Our GI Steel Lintel product is certified with 2 Hrs Fire rating. Now its more safe with trusted brand like "NEsteel Lintel".
• Suitable for all type of brickwork. 
• Strong bonding with any type of plastering. 
• Our customers- giant companies like L&T Construction, Shapoorji Pallonji, Godrej properties, K Raheja, Lodha & Many more. 

• Item Code: HDGI100x50D
• Production Capacity: 400 meter per Day
• Delivery Time: 10-15 days
• Packaging Details: Bundles